Samsung has been hard at work in promoting it’s latest flagships – the company has released a latest promo video showing how the Samsung Galaxy S6 Edge was ‘put together’, by that we mean assembled.
While most of us are used to unboxing videos – the first set of videos which shows the device and it’s accessories hands-on. The Inboxing video however should mean how the device got into the box and how it is packed along with its accessories.
The process of assembling the Samsung Galaxy S6 Edge starts with placing the fingerprint scanner into the front bracket. Then the flexible Dual Edge Super AMOLED display with 3D thermoformed Gorilla Glass 4 protection.
Only then does the 2600mAh battery, the embedded wireless charging coil, 16MP camera with OIS and f/1.9, the mother board with the 64-bit Exynos 7420 chipset made using the 14nm process, user storage/internal storage and RAM; which is now finally accompanies by the front 5MP with f/1.9.
After all this is assembled, it is packed with the metal frame of 6013 aluminium which is said to be 1.5 times stronger and 1.2 times than the 6063 aluminium. The metal frames then has the antenna welded into it, which makes it more stable and less prone to external impact.
Once all these are done, the Galaxy S6 Edge is ready to be boxed with the charger adapter, USB cable, the user manual and the likes. You can watch the official video below:
https://www.youtube.com/watch?v=X95EQIftcWY
You can also check out the Samsung Galaxy S6 (and S6 Edge) Drop Test and Bend Tests in the videos below:
https://www.youtube.com/watch?v=psyNKKKOKgY&itct=CKEBEKQwGAEiEwimlOG1s-rEAhURiRwKHSEIAHEyC2M0LW92ZXJ2aWV3WhhVQzJDLTk3MGQyby1ZR0xQcXNHNkZjV1E%3D≷=NG&hl=en-GB&client=mv-google
https://www.youtube.com/watch?v=eKburDQAolA&itct=CJ4BEKQwGAIiEwimlOG1s-rEAhURiRwKHSEIAHEyC2M0LW92ZXJ2aWV3WhhVQzJDLTk3MGQyby1ZR0xQcXNHNkZjV1E%3D≷=NG&hl=en-GB&client=mv-google
Source: Samsung Tomorrow
